Improve Browsing Speed

For those of you internet maniac would have never experienced such thing anymore’ve downloaded hundreds of megabytes speed ukuranya only 0.1 to 10 kb / s. continues browsingnya slow like a snail even slower than a snail, very resentful not you think, but I still have three tricks that can be make your internet connection so fast or even faster.

Ok we see immediately wrote-trick tricks well see ya …

1. Type “about: config” in firefox and press enter
2. Then will come out settings for firefox mentweaking
3. To change this, click two times and enter the data changes
4. If what I write below is not in firefox the default setting, right-click an empty place settings select New.Untuk be a number, select Integer, for true / false select Boolean.

– For users of DSL:

1. Set “network.http.pipelining: true”
2. Set “network.http.proxy.pipelining: true”
3. Set “network.http.pipelining.maxrequests: 64?
4. Set “nglayout.initialpaint.delay: 0?

– For ADSL users:

1. Set “network.http.max-connections: 64
2. Set “network.http.max-connections-per-server: 21
3. Set “network.http.max-persistent-connections-per-server: 8
4. Set “network.http.pipelining: true”
5. Set “network.http.pipelining.maxrequests: 100
6. Set “network.http.proxy.pipelining: true”
7. Set “nglayout.initialpaint.delay: 0

– For users of Dial Up

1. Set “browser.cache.disk_cache_ssl: true”
2. Set “browser.xul.error_pages.enabled: true”
3. Set “network.http.max-connections: 16
4. Set “network.http.max-connections-per-server: 4
5. Set “network.http.max-persistent-connections-per-proxy: 4
6. Set “network.http.max-persistent-connections-per-server: 4
7. Set “network.http.pipelining: true”
8. Set “network.http.pipelining.maxrequests: 4
Nine. Set “network.http.proxy.pipelining: true”
10. Set “plugin.expose_full_path: true”
11. Set “signed.applets.codebase_principal_support: true”
12. Set “content.interrupt.parsing: True”
13. Set “content.max.tokenizing.time: 3000000
14. Set “content.maxtextrun: 8191
15. Set “content.notify.backoffcount: 5
16. Set “content.notify.interval: 750 000
17. Set “content.notify.ontimer: true”
18. Set “content.switch.threshold: 750 000

2. With how to change your IP. Here’s how …

Click http://freeproxy.atspace.com your IP will change to IP http://n0c0py.uni.cc/proxy USA or click your IP will change to the Netherlands. Simply by clicking on the website address that we want and then click GO.Untuk http://www.showip.net Click to check our IP or click http://www.proxydetect.com. Or by manually click http://freeproxy.com then copy and paste the proxy lists that exist on the website.

3.Dengan use OpenDNS.

First click http://www.opendns.com after it lists on the website if you have signed up to live computer settings this way: Go to Control panel>> Network Connections>> Select the connection that we use>> Right click and properties>> On the internet protocol click properties>> Click Use Following DNS server addresses>> Fill in the Preferred DNS server to 208.67.222.222 and 208.67.220.220 bottom fill with. Then restart your computer and try to feel how fast is your Internet connection today.

You can check how fast your Internet connection by click http://www.sijiwae.net/speedtest/.

Advertisements

Play the game in windows 7 can not fullscreen

ATI VGA, 4:3 Fullscreen applications on wide monitor

1. Open Catalyst Control Center

2. From the drop down menu at the top, click “Desktop & Displays’

3. Below, there will be monitor2 list who could be used. who is active in the monitor options, click the black triangle, and select “Configure …”. If ga appear, ente one ngeklik triangles.

4. After that will appear “Notebook Panel Properties”. Select the tab “Attributes”.

5. In “Scaling Options”, select the “Full Screen” or “Maintain Aspect Ratio”, do not who “Center”.

6. If “Scaling Options” can be chosen alias ga abu2 color, change its first desktop resolution to a more advanced low resolution. Then try again to change the “Scaling Options” him.

7. Once converted, return to the desktop resolution setting who are usually used.

8. Try the test with a fullscreen application that displays only have the option 4:3 ratio. applications will be full strecth!

Coping Tips Slow Internet Access

You are often surfing the internet browsing certainly never experienced that suddenly becomes slow or error. This can happen because the internet connection was being bad. Things like this of course we can not fix easily, because it is associated with the internet provider we use.

But if it is not caused by bad connections, there are things that need to be done. Among them are like those below.

1. The easiest way is to restart your computer.
2. Clean your hard disk from the files that are stored as long as you surf, usually saved in the folder “Temporary Internet Files”
3. For users of IE (internet explorer), use the following steps:

– Click on “Tools” menu select “Internet options”
– On “General” tab select “Delete cookies”, “Delete files”, and “Clear history”
– So your hard drive will be clean again
– And the problems that arise while browsing will be resolved, because the cookies are erased
– The function of these cookies is to record your activities when visiting websites

4. For Mozilla firefox users use the following steps:

– In “Tools” menu select “Clear Private Data”
– Mark all, including cookies
– Then in the “Tools” menu select “Options”
– Select the tab “Advanced” then “Network” choose “Clear now”
– Functions to clear the cache or files stored while browsing

Make Firefox much Faster 3 times

The following steps tweaking firefox browser in order to work semaximal possible. The effect was quite large when membula content.

1. Type “about: config” in address bar and press enter. scroll down to the bottom and locate the following entries:

network.http.pipelining
network.http.proxy.pipelining
network.http.max-connections-per-server
network.http.pipelining.maxrequests
network.http.max-connections
network.http.max-persistent-connections-per-proxy
network.http.max-persistent-connections-per-server
Normally the browser will make one request to a web page at once. when you enable pipelining it will make several pages at once. and will speed up page loading

2. The following entries become the fox:

Set “network.http.pipelining” to “true”

Set “network.http.proxy.pipelining” to “true”

set “network.http.max-connections-per-server” to 32.

set “network.http.max-connections” to 60.

set “network.http.max-persistent-connections-per-proxy” to 16.

set “network.http.max-persistent-connections-per-server” to 8.

set “network.http.pipelining.maxrequests” to values like “30th”.

3.klik left (anywhere), select New-> Integer. input “nglayout.initialpaint.delay” in prefence name, later set the value to “0”.

left-click again (anywhere), select New-> boolean. input “browser.tabs.showSingleWindowModePrefs” set to “true”

Firefox 3 makes browsing faster

Keep in mind that the speed of browsing is highly dependent on the speed of your Internet connection.

Try the following ways:

Begin by opening the Firefox web browser, then type [about: config] in the address bar and press enter. (kurungnya signs do not participate in the type).

Step 1:
In the Filter bar type / copykan [network.http.pipelining]. then, double-click on the existing reference to change from false to true.

Step 2:
In the Filter bar type / copykan [network.http.pipelining.maxrequests]. then, double-click on the reference there is to change the number of digits from 4 to 10 to 30. Ane own select 20.

Step 3:
In the Filter bar type / copykan [network.http.proxy.pipelining]. then, double-click on the existing reference to change from false to true.

step 4:
In the Filter bar type / copykan [network.dns.disableIPv6]. then, double-click on the existing reference to change from false to true.

step 5:
In the Filter bar type / copykan [plugin.expose_full_path]. then, double-click on the existing reference to change from false to true.

step 6:
In the Filter bar type / copykan [network.protocol-handler.external.ms-help]. Now you will create a new reference to the Integer value. Way, right-click the mouse on the Reference and select “New”, then “Integer”. In the Integer type bar / copykan [nglayout.initialpaint.delay] and then click OK. and enter the value [0] (zero) and click OK.

Step 7:
In the Filter bar type / copykan [network.protocol-handler.external.ms-help]. Now you will create a new reference to the Integer value. Way, right-click the mouse on the Reference and select “New”, then “Integer”. In the Integer type bar / copykan [content.notify.backoffcount] and then click OK. and enter the value [5] (Lima) and click OK.

Step 8:
In the Filter bar type / copykan [network.protocol-handler.external.ms-help]. Now you will create a new reference to the Integer value. Way, right-click the mouse on the Reference and select “New”, then “Integer”. In the Integer type bar / copykan [ui.submenuDelay] and click OK. then click OK, and enter the value [0] (zero) and click OK.

Close / disable Firefox and restart again, and compare the results.

Good luck, good luck and useful to others friends …

Secret Shortcut in Mozilla

Here’s a secret shortcut from 9 Firefox, if a-gan2 to use this browser, try deh …

1: Auto complete the address. Org and. Net

If you type ‘google’ in the address bar and press Ctrl + Enter then you will be taken directly to http://www.google.com. But what about the address. Org and. Net? In Firefox, Shift + Enter will take you on. Net and Ctrl + Shift + Enter will take you on. Org automatically.

2: Alt + D

You can use this to navigate to the address of the Firefox browser.

3: Ctrl + T and Ctrl + Shift + T

Ctrl + T helps you open a new tab and Ctrl + Shift + T to reopen the last tab is closed.

4: Alt + Enter

This will automatically open the sites in another tab if you do highlight the AutoComplete list. For example, if you want to open Facebook and you type http://www.face …., In the address bar and it will begin to show the list.

5: Delete Key

Delete button is useful if you want to delete specific addresses in browser history or form AutoComplete. For example, if you type the ‘a’ in Google and get 3 entry. If you want to delete the second entry in the AutoComplete history, simply press Delete.

6: Ctrl + Tab

Ctrl + tab to help navigation between tabs with ease.

7: Ctrl + [1,2 … 9]

This is an extension of the function of Ctrl + tab, you can press Ctrl + the number you want to open a particular tab. For example, if you want to open tabs to 3, you can press Ctrl +3.

8: Spacebar and Shift + Spacebar or PageDown and PageUp

Spacebar or PageDown will shift the page down and Shift + Spacebar or PageUp shift onto the page.

9: Middle Mouse Button

You can place the cursor anywhere, and click the middle mouse button. This will open a new page in the tab.

Hidden File

All people used this folder option for hide their some file. but if your friend know this trick, it will be useless. in folder option menu, if you can’t set your windows folder option

This is the trick for hide your folder option:

1. open Run tiped regedit, ok

2. click HKey_Current_User folder (at left side)

3. click software (at left side)

4. click microsoft (at left side)

5. click windows (at left side)

6. click policies (at left side)

7. click explorer (at left side)

8. go to right side, find key named “NoFolderOptions”

9. double click the input “1” for hide the folder option, and input “0” for make it appear

10.if none named “NoFolderOptions”, then made the by your self, right click choose new, dword value input the name by “NoFolderOptions”, ok, then input 1 or 0.